Heater Core

[greyfoxmc]

Need some help here...

Are the heater cores from `64-`66 the same as `67-`70 ?

Thanks, Mike

------------------
" Passion Pit II "

[tomschaner]

negative.per hollander interchange manual 64-66 exclusively for van bus part #3005398 says it is 9 & 1/2 h x 6 & 3/8 w x 2 &1/2.the 67-70 van & bus only dimensions 9 & 1/2 h x 6 & 5/16 w x 2 part #3016796.

[greyfoxmc]

Thanks Tom.
There is one on E-Bay for $32.50 start.
Hope someone can use it.
Mike

http://cgi.ebay.com/ebaymotors/aw-cgi/eBayISAPI.dll?ViewItem&item=601009346

------------------
" Passion Pit II "

[painterchris]

If your old core has a hole in it, your best bet is to take it to a radiator shop and have them re-core it. I had mine re-cored last year and it was surprisingly inexpensive. The only hard part is finding a shop with the core in stock. I believe the total cost was under $30 and that included un-kinking the tubes.

Andy.

[vannman67]

The core in my van is 2 1'2" thick. I just had a local shop recore it. I tried ordering a new one but it was only 1 1/2" thick. Cost about 65 bucks.

------------------
Vannman67
aka Bryan Corbitt
Vancouver,Wa
1967 Chevy Sportvan 108"