• Home

    by Published on 03-25-2015 12:40 AM

    The VCVC is a community of Vintage Chevy Van owners, a resource center for Early Chevy Van parts and information, and is one of the largest active van clubs in the world today. With members in nearly every state and five countries, the Vintage Chevy Van Club represents early Chevy owners, worldwide.

    The club became official on January 1998, and the Vintage Chevy Van Club's site was launched that same month. With no specific focus on vintage vans of any make up til that time, the club began to establish a very loyal membership of vanners from around the country.

    Whether you have one Chevy van, a dozen earlies, or no vintage van at all; if you are in love with the 1964-1970 Chevrolet G-Series Van, you just found home.
    by Published on 06-23-2013 06:05 PM

    If this is your first time here, take a second to register to view and post in our club forums, blogs, and gallery.

    Any questions or comments? Send an email to info@vcvc.org.
    Published on 01-16-2013 08:35 AM

    Published on 04-29-2013 08:50 PM  Number of Views: 26262 

    Here is some valuable information provided by the GM Heritage Center about our vans, by year.

    Published on 08-07-2012 12:45 PM  Number of Views: 14075 

    Our new can koozies are now available in our club store.
    Black with white logo. Check them out!

    Published on 07-01-2012 12:51 PM  Number of Views: 7873 

    ATTENTION all early van owners… Overhaulin is coming to the 40th Van Nationals. We’re going to have a second generation Chevy van build. The build is going to be a 700-R4 modification with a throttle body injection system to go with it. Completing this overhaul will include a B&M shifter install as well as power windows and felts to accompany it. I also heard something about a new glove box install and something about a windshield as well.

    This will be a hands-on, where you can ask the build crew, whatever you want, plus see for yourself just how this all goes together. Be sure to watch for information on just where and when this will take place during the Warm-up Party for the 40th Van Nationals. Trust me; you will all be within a walk and a beer from this amazing build.

    Many thanks go out to the people who made this build possible, right before your eyes. That list is just too long to put here but, they will all get their kudos if you know what I mean.

  • Recent Forum Posts


    Spindle question

    On the same subject, If I may?

    I have a 64 G10 front solid I beam runs under the front of the van, attaches to the leafs bla bla

    CanVanMan 04-18-2021, 10:10 AM Go to last post

    Spindle question

    Anything's possible. But before going to that extreme you could look for a shop that could build up the worn area with weld, then turn and grind it back

    tinlizard 04-18-2021, 09:34 AM Go to last post

    New cargo door striker plates and springs

    I emailed someone about these. Not sure you got it...YES!
    They are available.
    I have a few complete sets. Plates, screws, and clips.

    van-itti 04-17-2021, 10:08 PM Go to last post

    Spindle question

    Don?t have any spindles, but have some info, all the 64/70 1/2 ton vans use the same spindle, I have one of each on my 69.

    panelmanrd 04-17-2021, 06:18 PM Go to last post
    Eds 68 Chevy Van

    Spindle question

    Tinlizard I get what your saying. My spindle is to far gone to do that. Thanks anyway bud.

    Eds 68 Chevy Van 04-17-2021, 03:41 PM Go to last post