Trim Plate Stamping.
Collapse
X
-
Most of the old printing press are reverse stamp. Maybe found at antique shop?
Make a couple for set-up purposes. Measure on front side and transfer to back side.
If you miss location or goof up..(it has been done)...you will have an extra.
Make a template...??
Fasten the stamps together(small clamp) and they will look straight and not like a ransom note.
Once that first one is done youre ready to make thousands of them.
Another awesome project!!Last edited by van-itti; 01-19-2020, 07:22 PM.Mike
Comment
-
-
STEELSTAMPS.COM sells reversed stamps. they have a 1/4 inch set of 36 number and letter kit for $141.00 and are located in USA. they are just the first place I found on the net. amazon has some offshore sets for cheaper.Last edited by rarechev; 01-22-2020, 07:35 AM.1970 108 panel, 350, 700R4, power tilt steering, power disc brakes, power windows
1969 90 panel, 454 LS5, T400, 12 bolt posi
1967 90 panel L6 3 speed manual 12 bolt
1966 90 panel California van
1966 90 panel Canadian van (sold)
1966 90 panel parts van
Comment
-
-
Trim Plate Stamping.
I measured a TRIM plate; the text size is 3/16" (.187).
Just for reference - if I am not wrong, the same size as the VIN plate numbers.
I just got blown away- I found a vendor who does plates (VIN etc.) "one off" he quoted me $200; or $40 just for stamping.
cruzbox - that will be great if your shop has a set.
rarechev - thank-you for the lead - I will check with them if they have a proper set for our trim plate.
Not that I want to go in business but maybe a few of us who want a plate can chip in togetherLast edited by gfleduc; 01-22-2020, 12:05 PM.Gary
1965 Display
Comment
-
-
they have 3/16 as well, I just checked a 36 piece set is $102.1970 108 panel, 350, 700R4, power tilt steering, power disc brakes, power windows
1969 90 panel, 454 LS5, T400, 12 bolt posi
1967 90 panel L6 3 speed manual 12 bolt
1966 90 panel California van
1966 90 panel Canadian van (sold)
1966 90 panel parts van
Comment
-
-
Trim Plate Stamping
Thank-you for looking.
Well, I talked with the guy who does all the "stampings". He enlighten me that it is not stamping but embossing.
It sounds as if the reverse stamping will not have the same appearance as the original "raised" text on the TRIM tag.
Something to ponder on...Last edited by gfleduc; 01-27-2020, 09:03 PM.Gary
1965 Display
Comment
-
Comment