Side mirror

[-sparky-]

I know this has been done before. I have the part numbers from LMC if needed

[-sparky-]

[tinlizard]

Do those mirrors attach using the existing holes in the door?

[gfleduc]

Side mirror

Added reference 16.068 P/N 985911 OEM standard mirror

[mimmell]

Would you please share the part numbers? Interested in updating the mirrors. Thank you.

I know this has been done before. I have the part numbers from LMC if needed

[-sparky-]

[66BeachCruiser]

Do those after market truck mirrors let you see the face of the mirror from the driver's seat? I've never installed one and I see it has a straight neck compared to the smaller swan neck mirrors.

[-sparky-]

These are truck mirrors in stainless steel .I cut the arm off and used my mig welder to re position the arm

[tinlizard]

Do those mirrors attach using the existing holes in the door?

[-sparky-]

Do those mirrors attach using the existing holes in the door?

Yes. Gasket,screws all compatible

[tinlizard]

Yes. Gasket,screws all compatible

Great! Thx.

[LedZeppvan]

I wanted to do that so my mirrors would be larger. I knew it could be done! If anyone wants a set to remake I have a perfect set of mirrors I will sell them at a great price if interested! They are very nice... need to be cut and welded. Here is an old picture of them they fit the door mirror holes perfect as stated. SOLD SOLD
PM if interested

[66BeachCruiser]

These are truck mirrors in stainless steel .I cut the arm off and used my mig welder to re position the arm

Cool. Stainless steel? I bought an original set of truck ones years back seeing that the swan mirrors were hard to come by and these had the same bases. My plan was to cut and weld like you did but make my own swan mirrors. I’ve since obtained some swans, but still would like to play with copying one just for kicks. Thanks for sharing. Good job making them work

[Not a Vette]

Picture does not seem to appear after uploading three times

[tinlizard]

What size rubber on your van?